manualshive.com logo in svg

Britax 7200/A/2010, Instructions For Use Manual, Page: 44 / 60

Share
Download
Britax 7200/A/2010 Instructions For Use Manual Download Page 44

COVER (STYLE MAY VARY)

The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are 
on the care label attached to the cover. If fluffy cover is fitted then washing the cover prior to use will 
remove excess fluff. 
Drying the Infant Safety Cushion™ Insert will take additional time as the impact foam will absorb 
moisture. Before washing re-engage the hook and loop on the cover and Seat Pad to prevent the 'hook' 
damaging the fabric.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if 
children either eat or drink while in the restraint as some food or drink products may cause damage or 
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.

CARE & MAINTENANCE

44

    VERY IMPORTANT:

 

Only use this child restraint with the cover supplied or a 

manufacturer-authorised replacement cover with identical 

shoulder height markers.

Summary of Contents for 7200/A/2010





























































Reviews:

No comments