14
6.2
Hose to Pump
The pump inlet and outlet ports have fittings which are specifically designed for
connection to the G ¾ female running nuts on the flexible hoses.
The hose end running nut is fitted with a rubber sealing washer which is held
captive within the nut assembly.
Locate the hose into position and screw the nut fully onto the fitting by hand.
Finally nip tight with pliers (4 to 5 Nm) for a water tight seal (
do not overtighten
).
Figure 8
Flexible hose
Port fitting
G
¾
running nut
assembly
Rubber sealing
washer (captive in
nut assembly)
Summary of Contents for ST PUMP 15TN
Page 31: ......
