General Cleaning
General Cleaning
General Cleaning
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve
the visible surfaces. All finishes will
wear if not cleaned correctly. The only
safe way to clean your product is to wipe
with a soft damp cloth. Stains can be
removed using washing up liquid. All
bathroom cleaning products (powders
and liquids) will damage the surface of
your fitting, even the non-scratch
cleaners.
Note:
Note:
Note:
Note: Never use abrasive detergents or
disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Bristan recommend E-
cloth for cleaning all of
Maintenance
Maintenance
Maintenance
Maintenance
See map of Hard Water Regions in the UK
overleaf to see the water type in your area.
Maintenance
Maintenance
Maintenance
Maintenance
We advise that your fitting is regularly
serviced in hard water areas to maintain
optimum performance (see map of Hard
Water Regions in the UK overleaf).
If your fitting begins to leak the following
should be carried out;
Isolate both hot and cold water supplies to
the kitchen mixer by either:
•
Turning the water supply off at the mains
stopcock or
•
Turning off the isolation valves to the
kitchen mixer.
cloth for cleaning all of
our bathroom & kitchen
products. Using just
water, E-cloth gives a smear
free, deep clean by breaking up and
holding dirt, which normal cloths leave
behind. Order through your Bristan
stockist (order code: ECLOTH).
Cleaning the Showerhead
Cleaning the Showerhead
Cleaning the Showerhead
Cleaning the Showerhead –
––
– QD BSM C
QD BSM C
QD BSM C
QD BSM C
Your Bristan showerhead has rub-clean
nozzles for easy cleaning. Simply rub your
fingers across the rubber spray jets
regularly and before you turn the shower on
to remove any scale or debris.
The hardness of the water in your area will
determine how often you should clean your
showerhead. Build up of scale in particularly
hard water areas combined with constant
use means you may need to clean your
showerhead once a week. To ensure
continued performance the showerhead
needs to be regularly descaled.
kitchen mixer.
1. Prise the cap off from the handle and
loosen the grub screw.
2. Pull the handle from the spline of the
valve / cartridge.
3. Remove the valve from the body by
unscrewing it with a suitable spanner.
If cartridge unscrew shroud, remove
cartridge retaining nut using a suitable
spanner and pull cartridge from the body.
3. Clean the valve / cartridge and seating, if
necessary replace the valve / cartridge.
4. Replace the valve and tighten fully using a
suitable spanner.
The cartridge has locating pins on the
bottom which align with locating holes in
the body. Tighten the cartridge retaining
nut and screw the shroud back on.
6. Replace the handle, tighten the grub
screw and push the cap back on.
13