Installation
Installation
Installation
Installation ---- Bath Shower Mixer
Bath Shower Mixer
Bath Shower Mixer
Bath Shower Mixer
Installation
Installation
Installation
Installation ---- Bath Filler
Bath Filler
Bath Filler
Bath Filler
1.
Identify all components prior to
installation
1.
Install the fittings onto the bath
using the provided washers (6),
above and below the bath and back
nuts (7), below the bath.
2.
Connect the hot and cold water
supplies.
3.
Fully open both valves, letting the
water to flow for a few minutes and
check all joints and connections
for leaks.
1.
Identify all components prior to
installation
2.
Install the fittings onto the bath using
the provided washers (6), above and
below the bath and back nuts (7), below
the bath.
3.
Connect the hot and cold water supplies.
4.
Fit the hose to the mixer (11) and the
handset using the small sealing washers.
5.
To fit wall bracket, position, mark out
and drill holes to suit, then screw wall
bracket to the wall, ensuring that the
handset will reach it.
6.
Fully open both valves, letting the water to flow for a few minutes and check all joints
and connections for leaks.
7.
Operate the mixer in both bath and shower mode. To switch from bath to shower
mode pull the diverter knob (8) up. After use the mixer automatically reverts to the
bath filling mode.
12