General Information
This product has been tested to the TMV2 scheme which complies with the BS EN
1287:1999 (LP) and BS EN 1111:1999 (HP) thermostatic mixing valve standards and
TMV3 scheme for use in Healthcare and commercial situations and performs to the
requirements of NHS specification D08.
BS6700 recommends the temperature of stored water should never exceed 65ºC. A
stored water temperature of 60ºC is considered sufficient to meet all normal
requirements and will minimise the build up of lime scale in hard water areas (see Map
of Hard Water Regions in the UK on page 24).
If the fitting is installed at low pressure (tank fed), then the minimum distance from the
highest installed position of the showerhead to the underside of the cold tank should be
at least 1 metre to ensure adequate performance.
Note:
Note:
Note:
Note: Nominally equal (balanced) inlet supply pressures are recommended for optimum
Note:
Note:
Note:
Note: Nominally equal (balanced) inlet supply pressures are recommended for optimum
performance with mixer showers.
This shower valve should be installed in compliance with the Water Supply (Water
Fittings) Regulations 1999 and the Scottish Byelaws 2004.
If in doubt, contact a registered plumber or you Local Water Authority or the Secretary of
The Institute of Plumbing, address as follows;-
The Institute of Plumbing,
64 Station Lane,
Hornchirch,
Essex, RM12 6NB
Tel: 01708 472791
4
Light
Commercial
Heavy
Commercial
Health Care
Recommended Usage
Recommended Usage
Recommended Usage
Recommended Usage
Domestic
Need help?
Need help?
Need help?
Need help? Give us a call on 0844 701 6273
0844 701 6273
0844 701 6273
0844 701 6273 and speak to one of our trained advisors.
