Installation
cont.
OP TS1503 CH C
OP TS1503 CH C
OP TS1503 CH C
OP TS1503 CH C (Concealed Model) continued.
3. Attach isolation elbows to mixer valve
3. Attach isolation elbows to mixer valve
3. Attach isolation elbows to mixer valve
3. Attach isolation elbows to mixer valve
This valve is supplied with isolation elbows
which need to be fitted as shown opposite.
With the elbows screwed fully against the
valve body it can be unscrewed a
maximum of 1.5 turns to allow for lateral
tolerance.
4. Attach the shower valve
4. Attach the shower valve
4. Attach the shower valve
4. Attach the shower valve
Insert the 15mm hot and cold water
supply pipes into the inlet connections and
tighten the nuts. Ensure the olives and
filter are in place.
Secure the shower valve to the backplate
Compression
Nut
Isolation
Elbow
Filter
Washer
Flow
Regulator
Check
Valve
Inlet
Adaptor
‘O’ ring
Secure the shower valve to the backplate
by tightening the backplate grub screw.
5. Fit the concealing plate
5. Fit the concealing plate
5. Fit the concealing plate
5. Fit the concealing plate
Once the valve is installed into position
within the wall cavity screw the concealing
plate fixing onto the finished wall surface
using the fixings supplied.
Slide the concealing plate over
the sleeve of the valve until
firmly against the wall
surface ensuring the
concealing seal is fitted
between the concealing
plate and the concealing
plate fixing.
Fixings
Concealing
Plate
Concealing
Plate Seal
Concealing
Plate Fixing
17
Need help?
Need help?
Need help?
Need help? Give us a call on 0844 701 6273
0844 701 6273
0844 701 6273
0844 701 6273 and speak to one of our trained advisors.
