• Please read these instructions thoroughly and retain for future use.
• All products manufactured and supplied by Bristan are safe provided they are installed,
used correctly and receive regular maintenance in accordance with these instructions.
•
This fitting needs to be installed in accordance with, and meet the requirements of the
Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
• If you are in any doubt about your ability to install this product safely you must
If you are in any doubt about your ability to install this product safely you must
If you are in any doubt about your ability to install this product safely you must
If you are in any doubt about your ability to install this product safely you must
employ the services of an experienced qualified plumber.
employ the services of an experienced qualified plumber.
employ the services of an experienced qualified plumber.
employ the services of an experienced qualified plumber.
• Do not use if the showerhead or shower hose has been damaged or is blocked.
• Do not crush or kink the shower hose, this could damage the hose and cause leaks.
• Remove all packaging and check the components for damage before starting
installation.
•
Warning:
Warning:
Warning:
Warning: Before starting any installation please consider the following: Prior to
drilling into walls, check that there are no hidden electrical wires, cables or water
supply pipes. This can be checked with the aid of an electronic detector.
Important Safety Information
supply pipes. This can be checked with the aid of an electronic detector.
• If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
•
The fitting of isolating valves is required as close as is practical to the supply inlet
feeds of the thermostatic mixing valve.
•
The fitting of strainers is recommended as close as is practical to the water supply
inlets of the thermostatic mixing valve.
•
Warning:
Warning:
Warning:
Warning: Before installing the new shower valve it is essential that you
thoroughly flush through the pipework in order to remove any remaining swarf, solder,
etc. Failure to carry out this procedure could cause problems or damage to the
workings of the shower valve.
• This product must not
must not
must not
must not be modified in any way as this will invalidate the guarantee.
3
Need help?
Need help?
Need help?
Need help? Give us a call on 0844 701 6273
0844 701 6273
0844 701 6273
0844 701 6273 and speak to one of our trained advisors.
