Installation cont
Installation cont
Installation cont
Installation cont
....
Bath Shower Mixer
Bath Shower Mixer
Bath Shower Mixer
Bath Shower Mixer
1. Identify all components are present prior to starting installation using the diagram
overleaf.
2. Install the mixer body (6) to the bath.
3. Using washers (7) and the backnuts (8) secure the mixer body (6) to the bath by
tightening the backnuts (8) onto the threaded tails (a suitable spanner maybe needed to
fully tighten the backnuts (8).
4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).
5. Fit the shower hose (12) to the hose outlet, using the small washer and the handset (13)
to the hose using the small washer.
6. Turn on both water supplies and turn the handles to the open position, letting the water
flow for a few minutes to check all joints and connections for leaks.
7. To switch from bath to shower mode, turn the diverter lever (10), to revert back to bath
filling mode turn the diverter lever back.
1.
Indice
x2
8.
Backnut
x2
2.
Handle Screw
x2
9.
Diverter Mechanism
x1
3.
Handle
x2
10.
Diverter Lever
x1
4.
Shroud
x2
11.
Cradle
x1
5.
Valve
x2
12.
Shower Hose
x1
6.
Mixer Body
x1
13.
Handset
x1
7.
Washer
x2
12