background image

1

104362-08 - 1/23

Alliance SL

Installation, Operating & Service Instructions

For service or repairs to the water heater, call your heating contractor. When seeking information 

on the water heater, provide Model Number and Serial Number as shown on Rating Label.

Installation, Operating and Service Instructions for

ALLIANCE SL

TM

Hydrastone-lined Indirect  Water Heater

TO THE INSTALLER: 

Affix these instructions adjacent to indirect water heater.

TO THE CONSUMER: 

Retain these instructions for future reference.

Models: 

  

 AL27SL

 AL35SL

 AL50SL

 AL70SL

 AL70CSL

Residential & Commercial

Manual Contents                                                         Page
1.  General Information 
  . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.    Specifications & Ratings 
  . . . . . . . . . . . . . . . . . . . . . .3
3.   Installation Guidelines 
  . . . . . . . . . . . . . . . . . . . . . . . .5
4.   Installation Checklist. . . . . . . . . . . . . . . . . . . . . . . . . .
8
5.   Service Information 
. . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.   TPI Control Diagrams
  . . . . . . . . . . . . . . . . . . . . . . . .11
7.   Installation Piping Figures 
 . . . . . . . . . . . . . . . . . . . .13
8.   Top Mount Coil Details & Tightening Sequence
  . . .15
9.   Circulator & Burner Control Wiring Diagrams 
  . . . .16
10.  Zone Valve Wiring Diagrams 
. . . . . . . . . . . . . . . . . . .17
11.  Switching Relay Wiring Diagrams 
  . . . . . . . . . . . . . .18
12.  Service Parts
  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
13.  How to Obtain Service Assistance
 . . . . . . . . . . . . . .21
 Warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

104362-08 - 1/23

To fully understand the purchaser’s responsibilities for 

installing the water heater, please read the warranty.

Summary of Contents for ALLIANCE SL AL27SL

























Reviews: