To Store a Memory Setting
1.
Turn Shower On by moving Flow Lever
anti-clockwise from the Off position.
2.
Select desired Temperature by using
“+” and “-” buttons as normal.
3.
Select desired Flow by adjusting the
Flow Lever as normal.
4.
Press-and-hold the Memory Button
“M”. The Digital Display will toggle
repeatedly between “1” and “2”.
5.
To Store in Memory 1, wait until the
display shows “1” and then release the
“M” button.
6.
To Store in Memory “2”, wait until the
display shows “2” and then release the
“M” button.
The desired Temperature and Flow
settings are now stored in the desired
Memory Setting.
To Recall a Memory Setting
1.
Turn Shower On by moving Flow Lever
anti-clockwise from the Off position.
2.
To recall a specific memory setting,
press-and-release the “M” button until the
requied number (“1” or “2”) is shown in the
Digital Display.
3.
The Controller will then set Temperature
and Flow (regardless of the actual position
of the lever) to the stored settings.
The Shower’s Temperature and Flow can
be adjusted in the normal way using the
Temperature buttons and Flow lever.
Any use of the Temperature Buttons will
override the Memory Temperature Setting
and revert to manual temperature contol.
Any use of the Flow Lever will override
the Memory Flow Setting and revert to
manual flow control.
Maintenance
General Cleaning
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces. All surfaces will wear if not cleaned correctly, the only safe way to
clean your product is to wipe with a soft damp cloth. Stains can be removed using
washing up liquid.
All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners.
Note:
Never use abrasive detergents or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric acid.
Operation
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
19