Fitting the Wireless Controller
Remove the locking ring and wall bracket
from the wireless controller by twisting
the locking ring clockwise.
Position the wall bracket onto the
finished wall surface and mark the fixing
holes.
Drill holes at the marked
positions on the wall
surface using a
suitable drill bit for
the fixings.
Secure the wall bracket
to the wall using the
fixings supplied or
suitable fixings for the wall type,
ensuring the locking ring is positioned
behind the fixing bracket.
Once the wall bracket is secured to the
wall surface turn the locking ring so
that one of the four fixing lugs is at a 12
o’clock position.
Fit the remote control onto the locking
ring. Twist the locking ring anti-clockwise
to lock the remote control into postition.
Wall
Bracket
Locking Ring
Wall
Bracket
Twist locking ring
anti-clockwise
to lock.
Fixing Lug
IMPORTANT
Prior to drilling
check ther
e
are no hidden
electrical cables
or water supply
pipes
Using masking
tape
when marking out
help prevent the drill
bit from wandering
when drilling
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
12
Installation