Important Safety Information
•
Please read these instructions thoroughly and retain for future use.
•
All products manufactured and supplied by Bristan are safe provided they
are installed, used correctly and receive regular maintenance in
accordance with these instructions.
•
If you are in any doubt about your ability to install this product safely,
you must employ the services of an experienced qualified plumber.
•
These fittings need to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999 and
Scottish Byelaws 2004.
•
Remove all packaging and check there are no missing or damaged parts.
•
Before starting any installation please consider the following:
•
Before drilling into walls, check that there are no hidden electrical
wires, cables or water supply pipes. This can be checked with the
aid of an electronic detector
•
If power tools are used do not forget to:
•
Warning: Before installing the new shower valve, it is essential that
you thoroughly flush through the pipework in order to remove any
remaining swarf, solder, etc. Failure to carry out this procedure could
cause problems or damage to the workings of the shower valve.
•
Fitting isolation valves to the inlet feeds is required for ease of
maintenance.
•
Access must be made available to the shower valve/mixer body for
maintenance/servicing purposes.
•
Do not block the flow of water from the showerhead by placing it
(smothering it) on your hand or any other part of the body or foreign
object.
•
Do not crush or kink the shower hose, this could damage the hose and
cause leaks.
•
Warning: Do not operate this product if you suspect it is frozen. Do
not site the mixing valve where it might be subjected to freezing
conditions.
•
These shower valves must not be modified in any way as this will
invalidate the guarantee.
-
Wear eye protection
-
Unplug equipment after use
Need Help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
3
