Brionvega BV1, Instruction Manual

Page: 89 / 102

NOTE : It is possible to directly select one of the 5 set selec-
tions (without entering the image menu) by using button (11).
In this case an indication (written in green) will appear on the
upper right of the screen stating the selection being used,
e.g. Cinema. If you want to select Nature, press button (11)
until the word Nature appears on the screen. (See also the
DIRECT ACCESS FUNCTIONS paragraph).
SUMMARY MENU
This menu contains a list of the programmes available. It is
possible to associate a name of about 5 characters to each
programme. For example, in the figure below programme 1
has been associated with the wording RA/1 (to insert the
names, see “Second carousel” chapter).
The main purpose of the SUMMARY menu is to display the
contents of the programmes either by moving the CURSOR
(cyan-light blue colour) or digitising the number corresponding
to the programme.
By using buttons
/ (5) it is possible to move vertically up
and down the column, whereas by means of buttons - / + (7)
the cursor moves from one column to the other.
Here follows an example of how to select programme 3 from
the SUMMARY menu.
1. Enter the SUMMARY menu by pressing the MENU button
(8) three times or by pressing the yellow button (13) for
direct access.
2. The SUMMARY menu appears on the screen, the cursor
is in the position associated with the programme viewed,
e. g. if you are watching programme 12 the cursor shall be
on number 12.
3. It is now possible to digitise number 3 on the remote con-
trol by using the numerical buttons (4), the cursor moves
on 3 and programme 3 appears on the screen.
Alternatively, from the start position 12 (as indicated in the
picture) place the cursor on 3 using buttons
/ (5) and -
/ + (7).
4. Return to TV mode by pressing button (14).
CAUTION: The SUMMARY menu is only available in the TV
mode, it is not displayed while in AVI or SVHS.
OTHER FUNCTIONS MENU
This menu contains the following functions:
• INPUT: it allows selection of the TV source.
- TV (antenna)
- AV1 (SCART socket)
- S-VHS (SVHS video socket/ BNC audio socket).
At switch on, the input will be in TV mode.
• FIXED OSD : it activates or deactivates the possibility to
have the programme number as permanent information on
the screen. When the TV set is turned on for the first time,
this function is not active, however by modifying it the set
value is automatically stored.
• ZOOM : it allows the activation or deactivation of doubling
the size of the menu characters, thus permitting a better
readability of the entries contained in the menus. When the
TV is switched on for the first time, this function is active;
if changes are made, the set value is automatically stored.
• TIMER : This function allows a time period to be set (at
intervals of 15 minutes up to a maximum of 120 minutes).
When the set time period has elapsed, the TV automati-
cally switches off to "stand by". When switching the TV on,
this function is never active.
Hereunder is an example of how to enter the OTHER FUNC-
TIONS menu and change the input on a SVHS external source
( see also "Connections to external sources", e.g. Video
recorders, cameras).
1. Enter the OTHER FUNCTIONS menu by pressing the
MENU button (8) 4 times or by pressing the BLUE
coloured button (13) once for direct access.
[B-16]
SUMMARY
0 10 20
1 RAI1 11 21
2 12 22
3 13 23
4 14 24
5 15 25
6 16 26
7 17 27
8 18 28
9 19 29
[B-15]
SUMMARY
0 10 20
1 RAI1 11 21
2 12 22
3 13 23
4 14 24
5 15 25
6 16 26
7 17 27
8 18 28
9 19 29
85
ENGLISH