Brinsea CONTAQ Z6, Operating Instructions Manual

Page: 14 / 28

14
The Contaq Z6 is now in a working incubation mode and can be set-up for your
personal preferences and those most suited to your species of eggs. To set-up your
incubator, push all three buttons (referred to as B1, B2 and B3) on the control panel to
enter settings.
Scroll through the settings using B2 (back) and B3 (next). Use B1 to select a setting.
Once in a setting, follow the display to adjust values. See the flowchart on page 26
for more details.
Settings are as follows (defaults in brackets) –
Display Title Description More Info Page
INC TEMP Adjust incubation temperature (39.0) 15
TEMP UNITS Change temperature units
between ºC and ºF (°C) Back of booklet
HUM LEVEL Change humidity levels RH% (40%) 16
OPERATION MODE Change between Incubation
and Hatching mode (Incubate) 20
TURN INT MAX Set maximum turning intervals (2h) 18
TURN INT MIN Set minimum turning intervals (1h) 18
TURN ANG MAX Set maximum turning angles (4s) 18
TURN ANG MIN Set minimum turning angles (2s) 18
TURN DIR Change between Random, Alternate,
Reverse and Forward turning directions
(Random) 18
COOL ON/OFF Switch cooling intervals on or off (on) 20
COOL INTERVALS Change interval time (24h) 20
COOL PERIOD Change cooling period time (20m) 20
SAVE & EXIT Permanently saves changes and exits
to running mode Back of booklet
ABORT CHANGES* Exit to running mode without
permanently saving changes Back of booklet
*To reverse unwanted changes switch off the incubator. The incubator will revert to
the previously saved settings upon restart.
Having determined the preferred settings, incubation can now progress.