2
3
4
5
1/4”
(7mm)
Start to
fi
t the two screws
supplied into the holes you have
made.
Tighten each screw un
�l
its head
is 1/4” (7mm) from the surface.
Hang the ChickSafe on the two
screws.
Gently
�g
hten each screw to
make the ChickSafe secure.
Make sure the ChickSafe remains
fl
at against the
fi
xing surface.
Make a hole or
fi
x a ring to the
centre of the top of the door as
necessary.
Tie the ChickSafe cord to the
hole/ring.
Make sure the cord is taut once
�
ed on.
6
7
8
Fit the ba
�e
ries into the holder.
Check the polarity of each
ba
�e
ry!
The ba
�e
ry holder
fi
ts this way
up in the top of the ChickSafe.
Fit the connector to the ba
�
ery
holder.
A
�e
r 10 seconds the motor will
operate brie
fl
y.
10
The ChickSafe is now ready!
The door will be opened or
closed according to daylight.
9
Fit the ba
�e
ry cover over the
top.
It pushes down into place.
11
Check opera
�
on carefully for
the
fi
rst few days to ensure the
installa
�
on is successful and the
door is opera
�
ng smoothly.
The red indicator LED provides
informa
�
on on current status.
Please con
�
nue reading for
more informa
�
on!
