L-1762-L
20
English Manual
================================================================================================
ASSEMBLY
: 48” Plug Aerator (
PA-482BH
)
STEP 7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
19
32
14
11
10
11
10
FLIP THE AERATOR OVER:
A
. Push the Axle Assembly (
10
) through the left side plate as far as possible
and rotate so the hole in the flat plate faces to the rear as shown.
Find this hardware:
- x24
Hex
Head Bolt (
19
) - 5/16” x 1.5”
- x24 Lock Nuts (
32
) - 5/16”
Install the Lift Handle Assembly (
11
) with the welded tube facing out, to the Axle
Assembly (
10
). Secure with Hex Bolt (
19
) and Nylon Lock Nut (
32
).
B
. Slip Handle Grip (
14
) over end of Lift Handle Assembly (
11
).
NOTE: Soapy water will help while adding the handle grip (14).
NOTE:
Make sure the
Axle Assembly Flat Plate (10)
and Lift Handle Assembly (11)
are pointing towards the rear
as shown.
