Attach
Detach
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR STOVE.
Inspect contents of the box to ensure all parts are included and undamaged.
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 800-527-0717.
(Proof of purchase will be required.)
3
Step 1
Snap down legs to form a "V" with the
stove base.
Step 2
Open lid and align the two wind guards by
inserting notched support arms into wind
guards.
Step 3
Remove regulator assembly from under grill
inside stove. Replace grill. Make sure
burner control knobs are in "OFF" position.
Step 4
Attach regulator assembly to stove fitting.
HAND TIGHTEN ONLY. Do not cross-thread
connections.
Step 5
Attach propane cylinder to regulator
assembly. HAND TIGHTEN ONLY. Do not
cross-thread connections.
CAUTION:
Turn cylinder so that it is almost
upright, slanted slightly towards you.
The cylinder does not sit flat
on surface. See diagram below.
Step 6
Follow "
Gas Leak Testing
" instructions on
page 4 of this manual.
TWO BURNER
STAINLESS STEEL
PROPANE STOVE
ROTATE TO LIGHT
E
T
I
N
G I
E
T I
N
G
I
E
E
T
T
II
NN
G G I I
E E
T T I I
N N
GG
II
Notched Support Arm
Cooking Grill
Regulator Assembly
WARNING:
Always snap down legs to form a "V" with
the stove base to prevent the stove from
becoming unstable while in use.
Burner Control Knobs
Note: Propane canister slants slightly
towards front of stove.
