Pure induct
BRINK / 15
GB
4. Installation
4.
If necessary, rotate the collecting unit.
•
Walls or other obstacles might prevent the opening of the collector box lid. In ththat
case, it is possible to rotate the collector unit relative to the rest of the appliance.
•
Set the appliance to ‘OFF’ mode by following the steps described in the ‘Use’
section of this manual.
•
Disconnect the power cord. Afterwards, wait at least 60 seconds.
•
Loosen the two bolts on the flange clamp, do not open it completely.
•
Rotate the collector unit to the desired position.
•
Retighten the bolts on the flange clamp.
5.
Place the collectors in the collecting unit.
•
Follow the steps mentioned in “5.1 Before first use/Changing the collectors”.
6.
Connect the Pure induct to a grounded power outlet and turn on the appliance
using the control box. During the first three days of use, the appliance may
produce a slight hissing sound. This is standard and will pass within three days.
Mounting examples
The image below displays various mounting examples for the connection of the Pure
induct to a ceiling or wall.
