background image

Pure induct

BRINK / 7

GB

yourself, instead contact your supplier if any defect is suspected. 

• 

Maintenance, repairs and service of the appliance must only be performed by 
qualified and trained personnel. 

• 

When performing maintenace, repairs or service of the appliance, the appliance 
must be turned off using the guidelines as described in this manual.

Collectors

• 

Only use collectors and accessories recommended by Brink. 

• 

Used filters may contain contaminants from recent operation. For proper handling of 
used filters, consult applicable health and safety standards or contact an industrial 
hygienist. To reduce risk of illness or injury, always use appropriate respiratory 
protection and protective clothing when removing or handling used filters. Dispose 
of used filters only in accordance with local laws and regulations.

1.2  Symbol glossary

Symbol

Description

High voltage

Attention

CE-marking – Appliance complies with 
the requirements of the EC - guidelines 
2014/35/EG and 2014/30/EG. 

1.3  Warranty

We cover the Pure induct air cleaning system with a one (1) year limited warranty. If, within 
one year from the original purchase date by the end-user from the authorized dealer, this 
air cleaner or any part thereof (with the exception of collectors) is proven to be defective 
by reason only of faulty workmanship or materials, Brink will, at their consideration, 
repair or replace the faulty air cleaner or part free of charge for labour and materials. The 
warranty for replaced parts will automatically expire with the termination of the original 
device’s warranty. 

Brink is not obliged to repair or replace appliances if:
• 

The appliance was not installed correctly according to the obligatory installation 
requirements in this manual.

• 

The appliance is defect due to damage, improper use other than described in this 
manual, or any modifications that were introduced after the purchase date.

• 

The appliance was repaired by anybody other than authorized mechanics from 
Brink.

• 

The appliance is damaged as a result of unforeseen circumstances, such as natural 
disasters, lightning etc. 

Any costs made as a result of above mentioned circumstances fall consequently exclusively 
at the expense of the purchaser, and are not covered by the warranty conditions.

To secure your warranty rights and prevent possible transport damage, all products must 
be returned in original Brink packaging with a copy of the original purchase receipt. Please 
keep the original packaging. Alternatively, original Brink packaging can be ordered, for a 
nominal fee, from Brink.

1.  Important instructions

Summary of Contents for Pure induct





















Reviews: