Brillion HFC Series, Assembly Instructions Manual

Page: 20 / 64

CENTER FRAME HALF
ROLL PIN
1/2” x 2”
PIN
1 7/16” x 10 1/4”
DRAWBAR
FIGURE 11
PIN
1 7/16” x 10 1/4”
ROLL PIN
1/2” x 2 “
CENTER FRAME HALF
LINK
DRAWBAR
JACK (Stored)
6. Position the sleeves of the drawbar between the lugs on the center frames.
Insert the 1 7/16” x 10 1/4” pin through the lugs on the frames and through
the sleeves on the drawbar. Trap each pin to the center frame lugs with
one 1/2” x 2” roll pin.
7. Attach the Link between the lugs at the front center of the two center frames and
secure it with the same pin and roll pin as used to attach the drawbar.
Make sure that the drawbar is free to pivot on its pins.
Now tighten all hardware.
8. The drawbar jack can now be repositioned so that it supports the front of the drawbar.
5K094 799
rev3-31-05
Page 18
MANUAL
CANNISTER