9. After each adjustment, completely raise the field cultivator, hold the hydraulic control in he
extend position, and then lower the machine until the tooth points are just barely off the
ground.
Note: During the leveling procedure, the front gage wheel is not supporting the frame
and the outside front teeth of the cultivator wing may touch the ground first.
This will be eliminated in the operation, by adjusting the front gage wheel.
Note: The machine is designed so that the rear will raise slightly more than the front.
This is done so that if you have drags mounted to the cultivator, there will be
adequate ground clearance in transport. Therefore the cultivator will not be exactly
level in the transport position.
5K094
799
rev3-23-05
Page 11
Summary of Contents for HFC Series
