Brillion Compaction Commander 03 Series, Operator'S Manual

Page: 10 / 34

Pa
g
e
1
0
Category II Hitch
Category III Hitch
Install 1 1/8” diamter lower hitch pins with pin
stop toward
inside of machine. Secure with 1/2”
capscrew and lock nut.
The 1-1/4” O.D. x 1-15/16” Long sleeve may be
used on smaller framed machines.
Be sure all hitch points seat properly.
Watch for possible interference between
the tool bar and tractor linkages when rais-
ing for the first time.
Install 1-7/16” x 6” long lower hitch pins as shown
with pin stop toward inside of machine.
Secure with 1/2-13 NC x 3” capscrews and lock
nuts.
ATTACHING TO TRACTOR
O
peration
O
peration
HHCS,
1/2-13 NC X 3”
LOCK NUT,
1/2-13 NC
PIN ASSEMBLY,
1-1/8” DIA.
SLEEVE,
1-5/32 I.D. x 1-7/16” O.D.
x 2-7/8” LONG
HHCS,
1/2-13 NC X 3”
LOCK NUT,
1/2-13 NC
PIN ASSEMBLY,
1-7/16” DIA.
Figure 3a
Figure 3b
9K308
604
Page 8
SLEEVE,
1-1/32 I.D. x 1-7/16” O.D.
x 2-7/8” LONG
HHCS,
3/8-16 NC X 2 1/2”
LOCK NUT,
3/8-16 NC
PIN ASSEMBLY, 1” DIA.
HHCS,
3/8-16 NC X 2 1/2”
LOCK NUT,
3/8-16 NC
PIN ASSEMBLY, 1-1/4” DIA.