7
Ball rectifi er
Security ring
Walk around
the pool
Wall of the pool
Ball
rectifi er
Connector
holder
Return pipes
Locations of the ball recti
fi
er
Direct the opening of the recti
fi
er to the diversion of the water
fl
ow in the place where it won‘t restrain
the vacuum pool cleaner operations. Try different positions in order to
fi
nd out which one is the most
suitable for your pool:
The
fl
ow directed along the wall of the pool (along the direction of tiles).
The current directing downwards.
The current directing against the hose will help to displace the vacuum pool cleaner from such
obstructions as steps and ladders.
After installing the ball recti
fi
er,
turn on the pump
. The vacuum pool cleaner should start to move
at the bottom of the pool and clean the dirt.
4. Removing the current defects
With regard to the individual features of your pool, there might be other settings necessary
to operate your vacuum pool cleaner at the maximum.
In case that the problem occurs, make sure that:
Is the main drain of the pool turned off?
»»
Turn off the drain.
Is the filter clean?
»» Clean the filter.
Is the basket sieve clean?
»» Clean the basket sieve.
Did the dirt block the bottom part of the vacuum
pool cleaner?
»» Get rid off the dirt.
The hose does not seal?
»» Change the component that doesn’t seal.
Is the dirt in the automatic
fl
ow controller?
»» Cleane the valve.
If the vacuum pool cleaner doesn’t move or change course:
Make sure that the main drain and all other suction piping are shut – except the intake to whom
the vacuum pool cleaner is connected.
Check if there isn’t any dirt in the
fi
lter or in the basket of the pump.
Picture 10
EN
