2
1. Mounting
Take the body of vacuum pool cleaner and its components out of the box and make sure that the packaging
includes all components needed. See picture no.1
List of components:
1. Body of vacuum pool cleaner
2. Immersion controller
3. Ball recti
fi
er and external ring
4. Hose weight
5. Automatic
fl
ow controller
6. 2” adapter
7. De
fl
ector
8. Folded padding
9. 10 metres long hose
(not in the picture)
Step 1. Fitting of the padding
While
fi
tting the padding, turn the word
„UP”
towards the
body of the vacuum pool cleaner, put the padding over the
disc (
fl
at side towards the bottom of the pool) and stretch
carefully until it locks into the groove on the other side, as
fi
gured in picture 2.
The padding must be put on
fl
at side
down
, up on the folded side. When it‘s put correctly, it turns
loosely.
It is impossible to use the padding the other way
round
. Elevated folds of the padding must point upwards.
The
fl
at side of the padding should be reversed down against
the side of the pool.
Picture 1
Picture 2
The main body
of the vacuum
pool cleaner
Folded padding
in the groove
Flange
1.
2.
3.
4.
5.
6.
7.
8.
Diaphragm
cleaner
EN
