Balancer Cube
Operator's manual
4
GB
1.2 NORMAL, SERVICE, STAND-BY operating modes
The machine features three operating modes:
• NORMAL mode. This mode is enabled when the machine is switched on and allows the machine
to run
wheel balancing;
• SERVICE mode. In this mode, there are a number of utility program
s
available to enter settings (e.g.
unit of measure in grams or ounces) or controls for machine operation (such as calibration).
• STAND-BY mode. After 5 minutes of inactivity, the machine automatically switches to the STAND-BY mode
to reduce power consumption. The green STBY LED present on the control panel flashes to indicate that
the machine is in this mode. To exit the STAND-BY mode, press any button (with the exception of [P7]
). All data and settings are maintained in the STAND-BY mode. In SERVICE mode, the machine will
not switch to the STAND-BY mode.
Summary of Contents for OSPREY BP63
Page 1: ...BP63 OSPREY...
