Balancer Cube
Operator's manual
16
GB
3.3.3 Automatic acquisition of the wheel dimensions for the STD and
ALU1,2,3,4,5 Program Types
To introduce the wheel size automatically, proceed as follows:
3.3.3.1 Machines with
distance sensor
1. Place
the wheel on the shaft;
2.
Extract the Distance/Diameter sensor and place it on the rim as shown in Figure F3.6.
3.
Wait to hear the long acquisition beep and then set the Distance/Diameter sensor back to the rest
position;
4.
Introduce rim width manually. The width of the rim is normally printed on the rim itself. Alternatively,
use the appropriate width measuring gauge.
Figure F3.6 - Automatic data acquisition in the STD, ALU1,2,3,4,5 program
s
Summary of Contents for OSPREY BP63
Page 1: ...BP63 OSPREY...
