4
BRIGGSandSTRATTON.COM
Installation
Read this
Installation
section carefully and become
familiar with
Homeowner Responsibilities, Installer
Responsibilities,
and the figures BEFORE
contracting or starting your Wireless StatStation
installation.
Unpack Wireless StatStation
Included in the carton is (See Figure 1):
• Display Console
• Wireless Transmitter
• AC/DC Adapter
• (2) Current transformers
• Installation and Operator’s Manual (not shown)
Figure 1: Carton contents
Items Not Supplied:
• Seven (7) ‘AA’ alkaline (2200mAH) batteries
• Connecting wires
• Mounting hardware and miscellaneous fasteners,
conduit, etc.
Homeowner Responsibilities
• Read and follow the instructions given in this manual.
• Follow a regular schedule in caring for and using your
wireless StatStation, as specified in this manual.
Installer Responsibilities
• Read and observe the
Important Safety Instructions
in
the
Safety
section.
• Read and follow the instructions given in this manual.
• Check federal, state, and local codes before
commencing installation.
• If you need more information about the wireless
StatStation system, call 1-800-743-4115, between
8:00 AM and 5:00 PM CT.
Transmitter Mounting Guidelines
The wireless StatStation transmitter is enclosed in a NEMA
Type 4 enclosure suitable for indoor use. Guidelines for
mounting the transmitter include:
• Install the switch on a firm, sturdy supporting structure
within 50 feet (15 meters) of the transfer switch and with
the serial number decal clearly visible.
• NEVER install the transmitter where any corrosive
substance might drip onto the enclosure.
• NEVER install the transmitter inside any grounded
metal cabinet or enclosure such as the transfer switch
enclosure.
• NEVER install the transmitter within 10 feet (3 meters)
of another transmitting device, such as a wireless
telephone.
• Protect the transmitter at all times against excessive
temperature, moisture, dust, dirt, lint, construction grit
and corrosive vapors.
A typical installation of the wireless StatStation transmitter is
shown in Figure 2.
Figure 2: Typical Wireless Transmitter Mounting Location
NOTICE
Power must be disconnected from display console and
transmitter during the entire installation process or
component failure will occur. Follow installation
instructions!
Main
Breaker
Panel
Automatic
Transfer
Switch
Wireless
Transmitter
Convenience
Outlet
Power
Management
Panel
All manuals and user guides at all-guides.com
