Briggs & Stratton Candiana 1695890, Operator'S Manual

Page: 21 / 56

21
en
Specifications
Model No.
1695886
ENGINE:
Brand Briggs & Stratton
Model Series Snow Series ™
Gross Torque* 8.00 T.P. @ 3060 rpm
Type 4-Cycle
Displacement 12.48 cu in. (205 cc)
Starting System Recoil, 230V Electric
Alternator None
Oil Capacity 18 - 20 oz (.54 - .59L)
Engine Oil Synthetic 5W30
Fuel Tank Volume 3.0 qts (2.8 liters)
Spark Plug Gap and Torque 0.030 in. (0,76 mm) 180 lb-in (20 Nm)
Resistor Spark Plug 491055
Long Life Platnium Spark Plug 5066
Ignition System This spark plug ignition system complies with Canadian standard ICES-002.
AUGER/IMPELLER:
Clearing Width 22 in. (55.9 cm)
Intake Height 12.6 in. (32.0) cm)
Auger/Impeller Diameter 10.0 in. (25.4 cm)
Number of Impeller Blades 2
CHUTE:
Chute De ß ector Quick Chute (Quick De ß ector, if equipped)
Chute Rotation Manual Rotation - 200° (Remote Rotation, if equipped)
DRIVE SYSTEM:
Drive Type Auger - Propelled
Drive Speeds N/A
Wheel Size 8.0 x 2.0 in. (20.3cm x 50.1cm)
* Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automo-
tive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is a
! ected by,
among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of
products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (ac-
tual “on-site” or net power). This di
! erence is due to a variety of factors including, but not limited to, accessories
(air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity
limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.