11
Assembly Instructions
The carton should contain:
• Unpack the air compressor unit. Inspect the unit for damaged. If the unit has been damaged, contact the retailer
immediately.
it has the required pressure rating for its intended use.
Positioning of the air compressor
1. Position the air compressor (
1
) near an electrical outlet (
2
)(
).
2. The compressor must be at least 12”(31cm) from any wall (
3
)
or obstruction, in a clean, well-ventilated area to ensure
).
The air compressor must be level to ensure proper drainage of
the moisture in the tank.
Connect air hose to compressor
1. Connect the air hose (
1
) to the compressor’s air outlet (
2
) with
the quick conncetor (
3
)(
).
1
2
3
Fig B
Note:
Air hose and quick connector are not provided, need to be
purchased separately. Apply plumber's tape on all the
threads to prevent air leakage.
1
2
3
Fig A
Notice
Hot compressor surfaces could result in serious injury. Allow compressor to cool before touching.
High pressure air could result in death or serious injury. Never operate above maximum operating
pressure of the spray gun or tool.
If the pump has been transported or turned upside down (even partially), allow the pump to sit in a normal,
upright position for approximately 10 minutes before starting.
WARNING
WARNING
• Air compressor
• Owner's manual
High pressure air could result in death or serious injury. Shut off unit, unplug and release air pressure prior
to servicing.
High pressure air containing water condensation could result in minor or moderate injury. Do not
spray at any person.
CAUTION
WARNING
WARNING
Risk of serious eye injury from moisture and debris. Always wear ANSI Z87.1 safety goggles when opening
drain valve.
12 / 31 cm
Summary of Contents for 74045
Page 19: ...19 Exploded View ...
