Briggs & Stratton 71 Piece Air Tool Kit, Operator'S Manual

Page: 14 / 44

12 BRIGGSandSTRATTON.COM
Rotate the reverse control lever to the “F” or fully
COUNTERCLOCKWISE position to tighten
fasteners. Depress the trigger lever fully to
activate the tool. Do not over-tighten fasteners.
To remove fasteners, rotate the reverse control
lever to the “R” or fully CLOCKWISE position.
Depress the trigger lever to activate the tool.
Other Supplied Accessories
Description
This kit includes a tire inflation tool, an air blow
gun tool with assorted tips, two needle inflators,
several adapters and adapter fittings and an
assortment of 1/4 in. hex drive bits. These
devices are designed for clearing areas of loose
debris or liquids, for air bladder inflation, or for
installing/removing fasteners.
Air Tool Oil
An initial supply of air tool oil is supplied with the
kit. Purchase more of this special oil at your
local hardware or handyman store. Use only
labeled air tool oil with the lubricated tools in this
kit.
Tire Inflation Tool
CAUTION Inspect the tire inflation tool before
use to ensure there are no loose components
Confirm the absence of defects or other
conditions that may affect safe operation.
To use the tire inflation tool (also called an air
chuck):
1. Connect tire inflation tool to air supply.
2. Press tire inflation tool over tire valve stem
and permit air to enter tire. Do not
overinflate.
3. Use an air pressure gauge (not supplied) to
establish recommended air pressure.
Recommended tire pressures are often
shown on side of tire.
Air Blow Gun
CAUTION Inspect the air blow gun and attached
fittings before use to ensure there are no loose
components Confirm the absence of defects or
other conditions that may affect safe operation.
CAUTION Never aim air stream at living things.
Ensure other people in the spray area are
wearing safety goggles and dust masks, as
appropriate.