Briggs & Stratton 71 Piece Air Tool Kit, Operator'S Manual

Page: 18 / 44

16 BRIGGSandSTRATTON.COM
S Sp pe ec ciiffiic ca attiio on nss
The air inlet on all supplied tools is ¼ in NPT.
Air Supply
Air supply MUST be greater than the air
requirement of the tool. Recommended air
compressor is 3/4HP for intermittent use, 1.5HP
or larger for heavier duty use.
Air Hose
Use a 10 ft (3M) or 25 ft (7.5M) air hose,
minimum 0.2 in (5mm) inside diameter (I.D.),
equipped with ¼ in. NPT threads. Hoses longer
than 25 ft (7.5M) should have an I.D. of 0.4 to
0.5 in. (10 to 12mm) for proper performance and
more convenience. Using fittings or air hoses
having smaller I.D’s creates a severe pressure
drop and reduces tool power.
CAUTION Keep hoses away from heat, oil and
sharp edges. Replace any hose that is
damaged, weak or worn. Never carry a tool by
the hose or pull the hose to move the tool or the
air compressor.
The use of air filters and air line lubricators is
recommended. See
Assembly .
Air Die Grinder
Mandrel Size 1/4 in & 1/8 in
Free Speed 22,000 RPM
Air Consumption 8.1CFM@90PSI
Weight 1.31 lb (0.6 KG)
Air Hammer
Chisel Shank (round) 0.40 in (10.2mm)
Bore Diameter (ID) 0.77 in (19.05mm)
Blows Per Minute 4,500
Stroke 1.61 in (41mm)
Air Consumption 5.8CFM@90PSI
Length 5.24 in (133mm)
Weight 2.47 lb (1.12Kg)
Air Impact Tool
Square Drive 1/2 in
Free Speed 7,000RPM
Max Torque 230 FT*LB
Pos 1 Air Consumption 6.2CFM@90PSI
Pos 4 Air Consumption 9.5CFM@90PSI
Weight
2.47 lb (1.12Kg)
Air Ratchet Wrench
Square Drive 3/8 in
Free Speed 150RPM
Max Torque 45 FT*LB
Air Consumption 6.2CFM@90PSI
Weight 2.5 lb (1.23Kg)