Brigantia 240DVRS25N, User Manual

Page: 9 / 43

24-DVRS25N
9
39 1/2”
1003 mm
11”
280 mm
26 1/2”
10”
254 mm
Framing Dimensions
The following section describes in detail
the requirements for framing for the
model 24-DVRSE25N.
Note: Framing should be constructed
as required by local building codes
Construct the opening
to dimensions shown:
26 1/2” wide x 39 1/2”
high X 5 1/2” deep
Unit must be min 4” up
from combustible floor
Installation Instructions
When installing on an exterior wall you must
include the exterior wall insulation and termi-
nation kit. Place insulation board with the
foil facing in to the room as shown in figure 3 Frame hole out opening and cut out hole for
the termination and thimble as shown in fig-
ure 1 and 2.
Figure 2
Figure 1
Figure 3
20”
508 mm