Brigade MDR-504 Series, Installation And Operation Manual

Page: 5 / 102

5
(35)
MDR-508GW-2-G2-SSD(NA) 8 (Analogue) + 8 (IP) 2TB 64GB
✓ ✓ ✓
Warning: Prior to attempting the system setup, please ensure the MDR 500 Series Installation & Operation Guide is thoroughly read
and understood. Brigade will not be responsible for any failures due to incorrect installation or operation.
Ensure your anti-virus software has exclusions in place to allow the MDR software package to function properly.
1.1 Product Features
Differences between MDR-504XX-X-XX-XXX(XX) and MDR-508XX-X-XX-XXX(XX)
MDR-504XX-X-XX-XXX(XX) MDR-508XX-X-XX-XXX(XX)
500GB / 1TB / 2TB (2TB maximum
) 2.5” HDD / SSD with anti-
vibration mounting
1TB / 2TB (2TB maximum)
2.5” HDD / SSD with anti-vibration
mounting
Industrial grade 32GB (256GB maximum) internal SD card for
mirror, sub-stream and alarm recording Industrial grade 64GB (256GB maximum) internal SD card for
mirror, sub-stream and alarm recording
Simultaneous 6 channel recording up to:
Analogue:
FULL HD @25fps (PAL) / @30fps (NTSC) for 4 channels
IP:
1080P @30fps for 2 channels Simultaneous 16 channel recording up to
Analogue:
HD @25fps (PAL) / @30fps (NTSC) each or 8 channels at FULL
HD @12fps (PAL) / @15fps (NTSC)
IP:
1080P @30fps for 8 channels
4x Select video connectors typical to camera inputs with audio 8x Select video connectors typical to camera inputs with audio
Weight: 2.2Kg Weight: 2.75Kg
Common to MDR-504XX-X-XX-XXX(XX) and MDR-508XX-X-XX-XXX(XX)
•
Internal anti-vibration mount for the HDD or SSD
•
Embedded super-capacitor for finalisation of recording after unexpected power interruption (up to 10 seconds)
•
Individual channel configurations for recording resolution, frame rate and quality
•
Anti-tampering feature
– using digital code
•
Display split 1/4/9 channels
•
2x EIA/TIA 485 (RS485) for optional External G-Sensor and Remote Status & Interface Panel
•
Operation log files for troubleshooting
•
Built-in G-Sensor
•
Built-in Audible Buzzer
•
GPS for location monitoring and tracking with external antenna
•
I/O: 8x trigger input (trigger voltage 9V which can be set to trigger at low/high); 2x trigger output (12V max. 200mA)
•
USB-B (3.0) interface on the Mobile Caddy Unit (MCU)
for displaying video recordings on a Windows™ operating system using MDR-
Dashboard 5.0
•
USB-A (2.0) interface on the Docking Station (DS) for downloads, upgrades and configurations onto a USB flash drive (flash memory
only, maximum 16GB)
•
Pre-alarm recording 1-60 minutes and Post-alarm recording 0-1800 seconds. (0 to 30 minutes)
•
Video quality selectable at 8 different levels for recording
•
Video/Audio compression H.264/ADPCM
•
Normal, Alarm or Timer recording modes
•
Alarm recordings configurable for trigger, speed, G-Force, video loss, motion detection, blind detection, panic button, geo-fencing and
HDD errors
•
Low voltage protection with configurable shut-down delay and minimum restart voltage
•
Ethernet 10/100/1000 RJ45 port for configuration, live view, playback and video download
•
Mouse for configuration and recording/event search
•
Shut-down delay configurable from 0 seconds to 24 hours
•
12V Output max 1A load
•
8.5-36V Power Input
•
Operating temperature and humidity: -40
˚C to +70˚C and 10% to 90%
•
MCU swappable between different models. Note: if an MCU having 8 channels records will only be able to playback first 6 channels
after install in an MDR-504xx model. If want to view all channels records, please use an MDR-508xx or MDR-Dashboard 5.0 to
playback. No need to format when swapping, all MDR models are sharing the same file system. The recording will immediately start
after install an MCU into the MDR docking station.
2 Kit Contents
2.1 MDR-504XX-X-XX-XXX(XX) and MDR-508XX-X-XX-XXX(XX) Kits
MDR-504XX-X-XX-XXX(XX)
MDR 500 Series 4 Channel Control Unit with 500GB / 1 TB / 2 TB HDD / SSD, GPS, 4G, Wi-Fi & 32GB SD Card (Depending on model)
MDR-504XX-X-XX-XXX-CU(XX)