Brigade MDR-504 Series, Installation And Operation Manual

Page: 38 / 102

38
Hardware
Hardware Config Import
is used to import a hardware config file
from a USB Flash drive. Ensure that you have copied the entire folder
“HWConfigFile” to your flashdrive. If the folder path has been changed,
this will not work and will not find the file correctly. See
Hardware Config
Import Figure 126 for a successful prompt window after an import
Hardware Config Export
is used to export hardware configs to a
USB flash drive. These can be used on other MDRs that will have the
exact setup. This is a quick method to check the hardware installation. If
a hardware config is imported to an MDR, there is no need to login (super
system check). Click Export to create hardware config file. See
Hardware
Config File Figure 125 for the typical path that is automatically created.
General System Check
requires the vehicle registration to be filled
in prior to checking. You must have an existing hardware config file on
the MCU. It is used to check for faults.
Super System Check
is used to create a hardware configuration
file. Click Login. By default, the Super User password is blank. You are
required to create a password, see
Super User Password
Figure 120 . We recommend
changing the password to “admin”. You will
then be presented with the hardware check screen. This indicates the
state of the HDD, SD cards, cameras and modules. Click the Create
button to store a hardware config on the MCU. See
Hardware Config
Save Figure 123 .
Hardware Figure 119
Super User Password
Figure 120
Hardware Check Page 1 Figure 121
Hardware Check Page 2 Figure 122
Hardware Config Save Figure 123
Hardware Config Export Figure 124
Hardware Config File Figure 125
Hardware Config Import Figure 126
General System Check Figure 127