2 Installing the Appliance
The following are the basic steps to installing the Appliance:
•
Connecting the Ethernet Interface
•
Connecting the 10Gb Ethernet Cables
•
•
Connecting the 12Gb SAS cables
•
Connecting the Fibre Channel Interface
•
*If an appropriate feature card is installed.
2.1
Appliance Configuration
The following image is a representation of the back of the Appliance and can be used to identify the
positions of the various feature cards available on your product.
Product
Onboard Port
A
Onboard Port
B
Slot 1 (1A/1B)
Slot 2 (2A/2B)
EFC102200
Management
Management
iSCSI Target
FC Initiator
ESAS102800
Management
Management
iSCSI Target
SAS Initiator
FCE102200
Management
Management
FC Target
iSCSI Initiator
FCSAS102800
Management
Management
FC Target
SAS Initiator
WANrockIT 100
Management
WAN
*
-
WANrockIT 200
Management
WAN
*
*
PORTrockIT 100
Management
WAN
*
-
PORTrockIT 200
Management
Management
*
*
*Feature card chosen at time of purchase.
2.2
Connecting the Ethernet Interface
The onboard Ethernet interfaces on the Appliance can be used on the following network configurations:
• 10BASE-T
• 100BASE-T
8
