Bridgeview BALE KING 5100 Operator'S & Parts Manual Download Page 30

 

  Bridgeview Manufacturing Inc.

 

27 

Transportation 

 
The Bale King 5100 can be safely towed on public roads, provided the following precautions are 

met: 

 

Tow vehicle and hitch must be rated at least 5300 lb gross, and 1600 lb tongue. 

 

NEVER exceed 40 km/h (25 mph). 

 

ALWAYS ensure that the safety chain is properly installed 

 

Tow vehicle must have a 7 pin round trailer plug (or adaptor) 

 

Plug in lights and check for proper function (flashing amber lights, red tail lights) 

 

Ensure that the supplied SMV (Slow Moving Vehicle) sign is clearly visible from the rear 

 

Lift the forks all the way up and install the safety locks 

 

If possible, the deflector should be in the folded position 

 

Ensure that the deflector safety lock is installed 

 

Ensure that the PTO and hydraulic hoses are properly secured 

 

NOTE: With the deflector folded and no grain tank, the overall width of the processor is 8'-6". 

 

Check with local authorities regarding transport on public roads.  Follow all applicable laws 

and regulations. 

Summary of Contents for BALE KING 5100











































































Reviews: