Bridgeview BALE KING 5100, Operator'S & Parts Manual, Page: 27 / 74

Bridgeview Manufacturing Inc. 24
Tire Inflation and Rating
Wheel bearings should be inspected annually for adjustment and lubricated annually. Inspect
more often for extensive traveling.
•
To tighten the wheel bearings, lift up each wheel (one at a time) until the wheel spins
freely.
•
Remove dust cap and the cotter pin which retains the castle nut.
•
Tighten the nut until the wheel will rotate approximately two turns when given a firm
spin.
•
Align castle nut to closest hole and insert the cotter pin.
•
Pack hub full of grease and reinstall the dust cap.
Proper tire inflation will help to alleviate puncture problems when towing and operating on
rough terrain.
Check for proper tire inflation 24 psi
Replace any damaged or worn tires 16Lx16.1 6-ply
Check and tighten wheel bolts on a regular basis 125 ft.lb
Note: When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side and NOT in
front of or over the tire assembly.
Note: Warranty does not cover damaged rims and hubs due to loose wheel bolts or flat tires.
Tire warranty is covered by the tire manufacturer.