Insert the QSFPs into the Primary (Blue) and Secondary (Red) ports, choosing a supported QSFP-type
from the list above.
You can then connect the two power cables and power the server on.
3.3
Accessing the User Interface
Once the server has been connected to the network, you can use a browser to connect to the user interface.
Please note that, for optimum results, Chrome is recommended to manage the VB440.
To connect to the VB440, you will either have to have mDNS and IPv6 working (typically only on Mac
OS) or know the IP. If you have connected to the static management port, the default address should be
10.0.20.101. Your machine will have to be on the same network in order to reach it through that address.
If you have connected it to the DHCP management port, you will either have to get the IP from your
DHCP server, or from the printout in the console.
Depending on if the product is enabled and is properly licensed you either get the enable / license UI or
the main UI up.
If you get a HTTPS certificate warning, just accept it.
If you get a login page as seen above, the product has not yet been activated. If you do not get a login
page, go straight to section 3.4
Log in using the username
root
and the password
elvis
.
VB440 Studio Probe User’s Manual v6.0
© Bridge Technologies Co AS
7
