BriarTek Orca DF-101, User Manual And Installation Manual

Page: 8 / 24

8
4.1 Display
a. General. Display should be mounted in accordance with platform-specific ship
installation drawings (SIDs) for shipboard installation or BOATALT GEN47B
drawings for RHIB/LCPL installation. For ship installations, the display is typically
mounted near the conning officer’s station. On a ship’s small boat, the display is
mounted on the console.
b. Mounting the DF Display. Display bracket should be installed IAW SIDs or
BOATALT drawings. If installing on a RHIB or LCPL, see section 4.1.c. for
attaching the DF display hood.
(1) Mate display to display bracket and attach using M4 fasteners, lock washers
and threadlock provided with the display.
(2) Attach power and data cables to the display. If the display will be installed
on a RHIB or LCPL, waterproof DB9 connectors with extended length gaskets
must be installed on the data and power cables. If replacing a DF-100 with a
DF-101 direction finder, replace the standard length gasket with the extended
length gasket provided. See figure 6. Please refer to electrical specifications in
Section 9.0, DF-101 Specifications, for connector requirements, cable pin-out
information and power & grounding requirements.
WARNING: Ensure power cable leads are connected correctly. Failure to do so
could result in DF display failure and will void warranty
Figure 5. DF-101 Display Mounting Hole Dimensions