BriarTek Orca DF-101, User Manual And Installation Manual

Page: 7 / 24

7
3.5 Dim
The display dimmer button (E) enables the user to dim the display LEDs. The
display has 3 levels of illumination. Push the button to decrease the illumination.
3.6 Signal Strength
The signal strength indicator LEDs (J) indicate the received signal strength on a
graduated scale from 0 to 6 (0 indicating weak/no signal and 6 indicating strong signal).
3.7 Warning
The warning LED (I) alerts the user to a failure in the system. If this LED is
illuminated, first turn off power (A) and check to ensure DB-9 data and power cable
connections (N & O) are fully secured. Turn on power (A). If warning LED is still
illuminated, see section 4.0, Maintenance and Troubleshooting procedures.
3.8 Default Settings
Default settings for the DF-101 are:
• Dim – High (brightest) value
• Squelch – Last saved value
• Speaker – OFF
NOTE: The system returns to the default settings when the DF-101 is turned on.
4.0 Installation and Repair Notes
The installation notes provided herein are intended to serve as a guide only. They do
not serve as material required for the certification of technicians for the installation,
repair or alteration of the ORCA® MOBI system.
NOTE: When replacing a DF-100 (see figure 4) with a DF-101, ensure that the
display and antenna are replaced. The DF-101 display does not function with the
DF-100 antenna; the DF-101 antenna does not function with the DF-100 display.
Figure 4. DF-101 display and antenna