1.
Neoprene Jacket
2.
Pressure Pack
ALWAY RELEASE PRESSURE from the fermenter
before removing any TC connection, fitting,
accessory, or lid clamp connected to the
Fermenter. Read section below on how to release
pressure from Fermenter.
This guide will walk you through assembling
and using your new conical fermenter.
GETTING STARTED
2.
CLEAN THE CONICAL
Before your first use, clean and rinse the conical
along with all the parts and fittings. This will remove
any leftover oil or dust from the manufacturing
process. We recommend using PBW cleaner. Do
not use bleach.
3.
WATER TEST
After cleaning and rinsing, we also recommend
filling your conical with water and familiarizing
yourself with its operations prior to your first use.
Before you tighten down TC clamps, make sure the
gasket is seated properly into both flanges.
Once the gasket is in place, loosen the clamp so it
can be fitted around the flange ends.
You do not need to use any tools for leverage
when tightening TC clamps. Hand tightening is
enough for a secure, leak-proof connection.
READ AND UNDERSTAND
THIS FULL MANUAL
Before your first use, read through this full manual,
and make sure you understand the use & warnings.
See BrewBuilt YouTube channel for additional
assembly videos.
1.
First Time Working
With TC Clamps?
Additional Parts
Included:
ITEM
DESCRIPTION
QTY
A
Pressure Lid
1
B
4" TC Clamp
1
C
4" TC Gasket
1
D
1.5" Blow Off Barb
1
E
Silicone Blow Off Tube
1
F
1.5" TC Clamp
3
G
1.5" TC Gasket
3
H
Conical Lid
1
I
Lid Clamp
1
J
Lid Gasket
1
K
Conical Body
1
L
1.5" TC Thermowell
1
M
1.5" TC Sample Valve
1
N
2" TC Gasket
1
O
2" TC Clamp
1
P
2" Butterfly Valve
1
Q
Flex Chamber
1
R
3/8" Leveling Foot
4
Parts List
PAGE 2
BREWBUILT.COM
1
2
