ATTACHING THE BEATERS
1. Insert each beater shaft into the left and
right beater sockets underneath the
mixer body (see Figure 1).
2. Insert the beaters by pushing the shaft of
the socket, turning slightly if required
until they lock into place.
3. Ensure that the speed selector switch is
set to the ‘OFF’ (O) position. Select a
mixing bowl large enough to
accommodate the beaters, as a bowl that
is too small will damage the beaters.
4. Add ingredients to the mixing bowl as per
the recipe or your requirements.
5. Plug the cord into a 230/240v power outlet
and turn power ‘ON’.
6. Place the beaters into the ingredients
inside the mixing bowl. To commence
mixing, move the speed selector switch to
the right to the required speed.
Always begin mixing on a lower speed
setting to prevent splattering, increasing
to the desired speed for the mixing task.
The speed setting can be adjusted during
operation by moving the switch from left
to right.
7. Move the mixer in a slight circular action
during mixing to allow the beaters to
efficiently mix the ingredients. Stop the
mixer now and then, using a plastic
spatula, scrape down the sides of the
mixing bowl, then continue mixing.
6
ASSEMBLY AND OPERATION OF YOUR BREVILLE WIZZ MIX
Always turn the Wizz Mix
off if you need to scrape
down the bowl during use.
AVOID CONTACT WITH BEATERS DURING OPERATION. KEEP HANDS,
HAIR, CLOTHING, SPATULAS AND OTHER UTENSILS AWAY FROM THE
BEATERS TO PREVENT INJURY OR DAMAGE TO THE WIZZ MIX.
ENSURE THE MIXER IS SWITCHED OFF AND UNPLUGGED FROM THE
POWER OUTLET BEFORE ATTACHING THE BEATERS TO THE MIXER.
Fig. 1
