Care and cleaning
13
Operating your Breville Wizz Electronic
continued
12
BE CAREFUL WHEN HANDLING THE CUTTING BLADES AS THEY ARE SHARP. MISHANDLING OF
THE BLADES MAY CAUSE INJURY.
THE CHOPPING BLADE AND DISCS ARE EXTREMELY SHARP!! USE CAUTION WHEN HANDLING
AND STORING THESE PARTS. ALWAYS STORE THE CHOPPING BLADE WITH THE PROTECTIVE
COVER PROVIDED
Step 5.
Remove the food pusher, insert the food to be sliced
or shredded and push down with the food pusher to
guide the food through the chute. Repeat with
remaining food. Do not overfill the food
processor bowl.
Step 6.
To switch off, press the same button again or press
the Stop button in the middle of the speed control
panel.
Step 7.
At the end of use, switch off at the power outlet and
remove the power cord.
4
6
•
Always ensure the Breville Wizz Electronic is in the
off position, by pressing Stop on the
speed/function control panel and switching off at
the power outlet and unplugging the power cord.
•
To remove the blender jug from the motor base,
grasp the handle and lift upwards. Use the Blender
Blade Assembly Tool to remove the Blender Blade
Assembly. The white plastic surround on the base of
the blender jug cannot be removed.
•
To remove the food processor bowl from the food
processor support on the motor base, turn bowl
clockwise and lift upwards. Follow instructions in
‘Assembly and Operation of your Breville Wizz
Electronic’ on page 9.
Cleaning the Motor Base, Food Processor
Bowl Support and Blender Blade
Assembly Tool
•
Wipe the motor base, food processor bowl support
and blender blade assembly tool with a soft, damp
cloth then dry thoroughly.
•
Wipe any excess food particles from the
power cord.
Cleaning the Food Processor Bowl, Lid,
Blade, Disc, Disc Shaft and Food Pusher,
Blender Jug, Blade Assembly, Inner Lid
and Lid
•
Wash all parts in warm soapy water with a soft
cloth. Use a kitchen bottle brush to dislodge foods
from the disc shaft, processing blade and disc.
Rinse and dry thoroughly.
Note: do not use abrasive souring pads or
cleaners when cleaning the parts or motor base
as they may scratch the surface.
Note
Removing stubborn or strong food stains
and odours
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odour or
stain on the processor bowl, lid and disc holder,
blender jug and lid. To remove, soak processing bowl,
lid and disc holder or blender jug and lid for 5
minutes in 100mls bleach dissolved in 2 litres water.
Then wash with a mild detergent and warm water,
rinse well and dry thoroughly.
Storage
Store Breville Wizz Electronic on the kitchen bench
top. The slicing/shredding disc can be stored in the
food processor bowl, with the lid and food pusher in
position. The blender jug, blade assembly and lids
can be assembled and stored next to it. Place the
food processor blade and blender blade assembly tool
in the blender jug for safe storage.
