![background image](http://html.mh-extra.com/html/breville/vkj436/vkj436_instruction-booklet_2809364006.webp)
using your tea maker/kettle
If your tea maker/kettle is filled above the maximum level mark, hot water may
be ejected from the spout during boiling. Beware of steam coming from your tea
maker/kettle especially during refilling. Never open your tea maker/kettle when it is
boiling.
Put the required quantity of tea leaves into the tea carriage. You can also use tea
bags if desired.
Line up the arrow on the tea carriage knob with the
UNLOCK
marking on the rim of
the infuser then slide the tea carriage into the infuser.
Rotate the arrow on the tea carriage knob until it is aligned with the
BASKET
RAISED
marking on the rim of the infuser. This will raise the tea carriage upwards.
Fill the body with the required amount of water. Don’t fill your tea maker/kettle past
the
MAX
mark and always ensure that there is at least 500ml (approximately 2
cupfuls) of water in your tea maker/kettle.
With the dot on the tab of the infuser positioned a few degrees anticlockwise of the
dot on the handle, as shown, slide the infuser/tea carriage into the body of your tea
maker.
Rotate the infuser/tea carriage clockwise until the two dots align as shown.
Place the body of your tea maker/kettle onto the power base and plug the base into a
suitable power supply socket.
Press the
START/STOP
button. The
START/STOP
button will flash red and the
SELECT
button and the
BOIL
indicator will be lit. This is the default setting for your
tea maker. If you want a different temperature, press the
SELECT
button to choose
the
LOW
,
MEDIUM
or
HIGH
setting.
Press the
START/STOP
button. The
START/STOP
button will illuminate white and
your tea maker/kettle will start to heat the water to the selected setting. As your tea
maker/kettle approaches the selected temperature, it will pause for a few moments
then continue heating. This is normal operation. When the correct temperature has
been reached the
START/STOP
button will flash red.
8. Rotate the arrow on the tea carriage knob until it is aligned with the
BREW
marking
on the rim of the infuser. This will lower the tea carriage into the water.
9. Allow your tea to brew to the desired strength and then rotate the tea carriage
knob until the arrow is aligned with the
BASKET RAISED
marking on the rim of the
infuser. This will lift the tea carriage out of the water preventing further brewing.
You may now pour the brewed tea directly from your tea maker/kettle.
1.
2.
3.
4.
5.
6.
7.