before first use
Remove any packaging and promotional material from your tea maker/kettle and position
it on a stable, secure, dry and level work surface away from the edge.
Before connecting to a power source, make sure your mains supply voltage is the same
as the one indicated on the appliance. Connect the plug to a suitable power outlet and
make sure that the power cord does not overhang the work surface. Excess power cord
can be stored in the power base.
Remove your tea maker/kettle from the power base and remove the tea carriage and
infuser.
Fill your tea maker/kettle to the maximum mark.
Fit the kettle lid.
Place your tea maker/kettle back onto the power base.
Press the START/STOP button. The BOIL light will illuminate.
Press the START/STOP button and allow your tea maker/kettle to boil.
Discard the water.
Repeat twice. This will remove any residue left over from the manufacturing process.
1.
2.
3.
4.
5.
6.
7.
8.