background image

Please read these instructions before operating the appliance and retain them for 

future use.  

This product is not suitable for use by children, and may not be suitable for persons 

requiring supervision unless they receive instruction by a competent person on how to 

safely use the product. Children should be supervised to ensure that they do not play 

with the product.
This appliance generates heat during use. Adequate precaution must be taken to 

prevent the risk of burns, scalds, fires or other damage to persons or property caused 

by touching the exterior whilst in use or during cooling.
Never use this appliance for anything other than its intended use. This appliance is for 

household use only. Do not use this appliance outdoors.
Always ensure that hands are dry before handling the plug or switching on the 

appliance.
Always use the appliance on a stable, secure, dry and level surface.
Never use a power base other than the one supplied with the appliance.
This appliance must not be placed on or near any potentially hot surfaces (such as a 

gas or electric hob).
The power cord is not replaceable by the user. Always return the appliance if the power 

cord is damaged to avoid any hazard. 
Do not use the appliance if it has been dropped, if there are any visible signs of 

damage or if it is leaking.
Ensure the appliance is switched off and unplugged from the supply socket after use 

and before cleaning.
Always allow the appliance to cool before cleaning or storing.
Never immerse any part of the appliance or power cord and plug in water or any other 

liquid.
Never let the power cord hang over the edge of a worktop, touch hot surfaces or 

become knotted, trapped or pinched.
Never leave the appliance unattended when in use.

Beware of steam coming from the spout or lid especially during refilling. Never open 

the lid during the boiling cycle.

Never fill the appliance when it is positioned on the power base.
Never fill the appliance above the MAX marking. If the appliance is overfilled, boiling 

water may be ejected.

Never use the appliance without sufficient water for it to operate correctly.

Never allow the appliance to boil dry.

!

!

!

!

!
!
!

!

!

!

!
!

!

!
!

!
!

!
!

product safety

Summary of Contents for VKJ436





















Reviews: