Breville twin paddle, Instruction Booklet

Page: 15 / 40

15
Notes
You can use the MENU button during programming (and before you press the HOME
MADE button at step 18) to step through and check each stage of your program.
If you want to change any step in your program before you have finished programming,
use the MENU button to go to that step then make your change.
If you want to change any step in your program after it has been programmed, do the
following:
1. Press the HOME MADE button once. Your bread maker will beep and the display will
show 13 under MENU.
2. Press and hold the HOME MADE button until your bread maker beeps. You are now
in program mode and at step 1 (preheat time).
3. Use the MENU button to go to step you want to change.
4. Use the + or – buttons to make your change.
5.
When you have finished, press and hold the HOME MADE button until your bread
maker beeps. Your new program has now been entered into your bread maker’s
memory.
The table below shows the ingredients for the granary bread program used in our
example if you would like to try out your new programming skills!. We have also included
a home made chutney recipe in the recipe section that you can program and try out too.
Granary Bread
Menu (program) number 13 (Home Made)
Total cooking time 2:50
Water, tepid 275ml
Butter or margarine 25g
Salt 1¼ tsp
Sugar 2 tsp
Granary bread flour 500g
Dried yeast 1½ tsp