11
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
SAFETY FEATURES
Standby
After 30 seconds of non use the milk frother
will enter standby mode and the button
surround will cease to illuminate.
To re-activate the milk frother out of standby
mode, press the START | STOP button.
Boil Dry Protection
The milk frother will automatically cease
to operate if the jug overheats. This can
be caused if the jug is empty, if liquid is
below the MIN measurement marking, or
after consecutive uses. If this occurs, 3 alerts
will sound. Unplug the power cord from the
power outlet, wait approximately 5 minutes
for the milk frother to cool down or fill the
milk jug with water for faster cooling. Once
adequately cooled, you will be able to reactive
the milk frother and re-activate frothing.
Thermal Fuse Protection
This feature protects the milk frother in
case of major fault.
If this occurs, the milk frother will
automatically turn off and will not re-
activate. Immediately cease use and
remove from the power outlet.
For assistance contact Breville Customer
Service on:
Ph: 1300 139 798 (Australia) or
Ph: 0800 273 845 (New Zealand).