9
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
NOTE
Never operate without the minimum
level of liquid in the milk jug. The milk
frother will automatically turn off if the
milk jug is empty. If this occurs, you
will need to wait for the milk frother
to cool down before re-use.
MIN
MAX
NOTE
For optimum frothing results, do
not exceed the CAPP/LATTE MAX
(500ml) marking inside the jug.
5.
Place the jug correctly onto the power
base, ensuring the jug is dry and clean.
6.
Turn the START | STOP dial to the
desired temperature. When frothing
milk for a cappuccino or latte, we
recommend staying within the
‘OPTIMUM MILK TEMP’ range,
however this is up to your personal
preference.
If temperature setting is changed whilst
in operation, the appliance will stop at
the new temperature selected.
Press the START | STOP button once to
commence frothing the button surround will
start flashing to indicate the frothing cycle
has commenced.
NOTE
Do not remove jug during operation.
To stop operation at any time, press
the START | STOP button once.
7.
When liquid has reached set
temperature, the appliance will stop
automatically. This will take anywhere
between 2 -7 minutes depending on the
quantity of milk used. Carefully remove
the jug from the power base as the jug
and contents will be hot. Always remove
the jug using the jug handle. Be careful
not to place the jug on a table, plastic
surface or heat sensitive surface which
may scorch or melt. Remove the jug lid
and pour the frothed milk.
8.
Clean the milk jug and frothing disc
after use. Allow the milk jug and disc to
cool completely before disassembling.
WARNING
Surface of the jug will be hot during
and after operation. Do not place hot
jug on heat sensitive surfaces.
WARNING
Do not place hot jug onto power cord.
