Breville the Control Grip BSB510XL, Instruction Book

Page: 11 / 68

11
ASSEMBLy & OPERATION
MINI CHOPPER
TO ATTACH THE CHOPPING BLAdE,
CHOPPING BOWL ANd CHOPPING
BOWL LId.
Remove the blending shaft from the motor
body (follow the instructions on page 10 “To
detach the blending shaft”).
Place the chopping blade onto the metal
pivot pin in the base of the chopping bowl.
Place the food inside the chopping bowl. Do
not exceed the maximum 'MAX' marking.
Place the lid onto the chopping bowl.
Align the motor body with the chopping
bowl lid and push down until the motor
body ‘clicks’ into place. Ensure the
chopping bowl lid is dry with no water left
inside before reattaching.
NOTE
Always place the chopping blade
onto the pivot pin on the bottom of
the chopping bowl BEFORE placing
any food in the bowl. Do not lift the
blade before the complete chopping
operation is finished.
TO USE THE CHOPPING BOWL
For food preparation tips and recipes refer to
page 19 and the recipes section of this booklet.
Ensure the chopping bowl is completely and
properly assembled.
1. Place food to be processed into the
chopping bowl. Do not exceed the 'MAX'
marking on the chopping bowl.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at
the top of motor body, select a speed
between 1 and 15.
Low Speed : 1
High Speed : 15
4. Press the trigger switch to turn the mini
chopper on. The button must be held for
the required duration of operation.
BSB510XL_IB_A10_FA.indd 11 5/08/10 9:49 AM